AutoCAD drawing tools: Polyline - Radar Tutor

    Social Items

Polyline is a type of drawing commands to create lines, but the resulting object is a polyline single-entity line.

Differences polyline commend with Line command
Polyline:
1. If it is used for a segment that is segmented, the result of the line is a whole.
2. Can be made in combination with curved lines.
Line:
1. If it is used for a segment that is segmented, the resulting line is not a single unit.
2. Cannot be made in combination with curved lines.

How to activate the polyline command in AutoCAD:
1. Command method
Command: pline
Command method
2. Toolbar method
Toolbar method

The polyline commands application method:
a) Activate the Polyline command
b) Click the starting point for making a line (point 1)
c) Type @ 5.0 (5 for x, 0 for y), then press enter
d) Type @ 8 <30, then press enter
e) Type A (arch = curved), then press enter
f) Click point 3 (specify curvature)
g) Type L (line), then press enter
h) Click point 4 (last point), then press enter
The polyline commands application method

AutoCAD drawing tools: Polyline

Polyline is a type of drawing commands to create lines, but the resulting object is a polyline single-entity line.

Differences polyline commend with Line command
Polyline:
1. If it is used for a segment that is segmented, the result of the line is a whole.
2. Can be made in combination with curved lines.
Line:
1. If it is used for a segment that is segmented, the resulting line is not a single unit.
2. Cannot be made in combination with curved lines.

How to activate the polyline command in AutoCAD:
1. Command method
Command: pline
Command method
2. Toolbar method
Toolbar method

The polyline commands application method:
a) Activate the Polyline command
b) Click the starting point for making a line (point 1)
c) Type @ 5.0 (5 for x, 0 for y), then press enter
d) Type @ 8 <30, then press enter
e) Type A (arch = curved), then press enter
f) Click point 3 (specify curvature)
g) Type L (line), then press enter
h) Click point 4 (last point), then press enter
The polyline commands application method